A more affordable square than its rosewood countrparts, our beechwood squares are fitted with a blued steel blade held in place by three brass rivets and a brass plate on the front of the stock for extra lasting life. All our try squares are manufactured to BS3322. Each square is tested for accuracy twice during manufacture and again immediately prior to despatch from the manufacturers. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

A more affordable square than its rosewood counterparts, our beechwood squares are fitted with a blued steel blade held in place by three brass rivets and a brass plate on the front of the stock for extra lasting life. All our try squares are manufactured to BS3322. Each square is tested for accuracy twice during manufacture and again immediately prior to despatch from the manufacturers. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

A more affordable square than its rosewood counterparts, our beechwood squares are fitted with a blued steel blade held in place by three brass rivets and a brass plate on the front of the stock for extra lasting life. All our try squares are manufactured to BS3322. Each square is tested for accuracy twice during manufacture and again immediately prior to despatch from the makers. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

Used for marking out right angles and checking for squareness. The rosewood stock is fixed to the blade by three brass rivets. The blade itself is chemically blued to help prevent corrosion. The stock is fitted with a brass plate to provide a hard working edge, which ensures a long working life.

Used for marking out right angles and checking for squareness. The rosewood stock is fixed to the blade by three brass rivets. The blade itself is chemically blued to help prevent corrosion. The stock is fitted with a brass plate to provide a hard working edge, which ensures a long working life.

Used for marking out right angles and checking for squareness. The rosewood stock is fixed to the blade by three brass rivets. The blade itself is chemically blued to help prevent corrosion. The stock is fitted with a brass plate to provide a hard working edge, which ensures a long working life.

Used for marking out right angles and checking for squareness. The stocks are made of Rosewood, the blade from tempered, blued steel. They have a machined brass face for protection against damage and accuracy. The blade is secured by means of 3 brass diamond washer and steel rivet. The rosewood stocks found on the carpenter's square result in an attractive tool. Manufactured to British Standard BS3322. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

Used for marking out right angles and checking for squareness. The stocks are made of Rosewood, the blade from tempered, blued steel. They have a machined brass face for protection against damage and accuracy. The blade is secured by means of 3 brass diamond washer and steel rivet. The blade has also been chemically blued to help prevent corrosion. The rosewood stocks found on the carpenter's square result in an attractive tool. Manufactured to British Standard BS3322. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

Used for marking out right angles and checking for squareness. The stocks are made of Rosewood, the blade from tempered, blued steel. They have a machined brass face for protection against damage and accuracy. The blade is secured by means of 4 brass diamond washer and steel rivet. The blade has also been chemically blued to help prevent corrosion. The rosewood stocks found on the carpenter's square result in an attractive tool. Manufactured to British Standard BS3322. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

Used for marking out right angles and checking for squareness. The stocks are made of Rosewood, the blade from tempered, blued steel. They have a machined brass face for protection against damage and accuracy. The blade is secured by means of 4 brass diamond washer and steel rivet. The blade has also been chemically blued to help prevent corrosion. The rosewood stocks found on the carpenter's square result in an attractive tool. Manufactured to British Standard BS3322. The squares are tested on both the inside and outside faces, our specification for the internal angle is twice as accurate as that specified in the British Standard, an accuracy better than 0.01mm/10mm blade length. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

The squares have 1/8th inch thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges. They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the try squares is well within that required by BS3322.

As the name suggests, this square enables setting of 45° mitres. Made from Rosewood stock, blued steel blade and 4 brass diamond shaped rivets and a brass base. All TOOLMAN squares are tested during manufacture and prior to despatch. They are tested on both internal and external faces. the internal faces are accurate to better than 0.001" nominal size.

The squares have 1/8th inch thick machined brass on both the inside and outside faces, thus ensuring accuracy on the inside and outside edges. They have a chemically blacked spring steel blade, secured to the stock with brass diamond washers and steel rivets. The accuracy of the mitre squares is well within that required by BS3322. The pinnacle of a Sheffield made product.

Can be used as mitre square, spirit level, 45° angle, plumb level, height gauge, marking gauge, straight edge, steel rule and scriber. 300mm/12" in length. Square extends 85mm / 3-1/4" from straight edge.

More heavy-duty than the TM586 square. Can be used as mitre square, spirit level, 45° angle, plumb level height gauge, marking gauge, straight edge, steel rule and scriber. 300mm/12" in length. Square extends 85mm / 3-1/4" from straight edge.

The unique Engineer's & Carpenter's combination set incorporates seven essential measuring tools for today's professional tradesmen. Manufactured for TOOLMAN in the UK, the materials are of the highest quality ensuring durability and precision measuring. The TM88 model incorporates a T square which has its own 45 degree set angle and spirit level and a lockable sliding centre mitre to locate the centre of circles easily and accurately. The protractor will set a variety of angles up to 180 degrees and there is an aluminium marking gauge in both metric and imperial values. Together with the set square and scriber, this combination set is a handy piece of kit for carpenters and engineers.

Half the size of its counterparts, this 150mm (6in) square can be used as a marking gauge, outside try square and spirit level. With aluminium rule.

Produced to British Standard (BS939), workshop in Bin grade for squareness tolerance. Blade and stock precision ground from high quality carbon steel - Squareness of hardened blade edges and stock working edges to within +0.016mm (0.00064in).

Produced to British Standard (BS939), workshop in Bin grade for squareness tolerance. Blade and stock precision ground from high quality carbon steel - Squareness of hardened blade edges and stock working edges to within +0.016mm (0.00064in).

Produced to British Standard (BS939), workshop in Bin grade for squareness tolerance. Blade and stock precision ground from high quality carbon steel - Squareness of hardened blade edges and stock working edges to within +0.016mm (0.00064in).

Produced to British Standard (BS939), workshop in Bin grade for squareness tolerance. Blade and stock precision ground from high quality carbon steel - Squareness of hardened blade edges and stock working edges to within +0.016mm (0.00064in).

Produced to British Standard (BS939), workshop in Bin grade for squareness tolerance. Blade and stock precision ground from high quality carbon steel - Squareness of hardened blade edges and stock working edges to within +0.016mm (0.00064in).