Two-piece TCT sets used to produce cabinet and lightweight internal raised panel doors. The sets include a 76mm panel raising cutter and a double stile and rail cutter in a choice of two styles, bevel and ogee. Maximum timber thickness 22mm, minimum 19mm.
Available in ½"(12.7mm) shank only.
Must only be used in a router table.

A superb long shank cutter set introduced for use on those router tables where the thickness of the table or insert limits the full depth of cut. Each shank is clearly marked with the correct depth of insertion into the router collet for safe usage. Shanks are 36mm in length, useful when using a router table or when a sub base has increased the thickness of the router base.

• 3 x Two Flute straight cutters 6, 12 & 16mm dia
• 2 x Bearing Guided Rounding Over cutters
• 6.3mm & 9.5mm Radius
• 1 x V Groove cutter
• 1 x 4mm Radius Ogee cutter
• 1 x 6.3mm Radius Box cutter
• 1 x 6.3mm Radius Cove cutter with bearing
• 1 x 45° Chamfer cutter with bearing
• 1 x Template Profile cutter with bearing
• 1 x 12mm Dovetail cutter

½"(12.7mm) shank cutters are less susceptible to vibration or chatter making them a good choice if you have a router with a ½"(12.7mm) collet. The 48mm long shanks of these cutters are very useful for many other applications where reach of standard shank cutters is insufficient, for example router table use or when a sub base is in use.

• 12 piece set consists of:
• 3 x Two Flute straight cutters 6.3, 12.7 & 19mm dia
• 1 x 6.3mm Radius Box cutter
• 1 x 12.7mm Template Profile cutter with bearing
• 1 x 45° Vee Groove cutter
• 1 x 12.7mm Radius Rounding Over cutter with bearing
• 1 x 12.7mm Radius Cove cutter with bearing
• 1 x 45° Chamfer cutter with bearing
• 1 x 9.5mm Rebate cutter with bearing
• 1 x 6.3mm Radius Roman Ogee cutter
• 1 x 12.7mm 14° Dovetail cutter