Manufactured from stainless steel, our protractor has a 200mm (8in) blade for measuring angles on most surfaces e.g. wood, metal plastic or cardboard etc.

A very handy digital protractor, ideal for steel work due to its strong alloy body and built in base magnets. With simple calibration and a display that always reads the right way up it's easy to use and read. It has a hold facility so that you can use it where you cannot read the display. A "V" groove in each side makes it suitable for use on tubular work, so it would be great for setting up guard rails on stairs etc. A very useful device, 150 x 60 x 32mm, supplied with a battery and belt pouch.

The Original True Angle tool is the world's fastest and easiest angle making tool available. Just rotate the blades and read the dial. The hairline locates the exact angle within a tolerance of 5/1000ths of an inch. The blades rotate 360° in both directions. To lock the blades, lightly tighten the finger nut. To unlock the blades rotate the top blade anti-clockwise. The Original True Angle replaces every triangle, protractor, try square, bevel square, rafter square, framing square, combination square, or any other angle making template presently manufactured anywhere in the world. Made of special plastic the True Angle is virtually unbreakable.

This is a 2 in 1 folding rule with a big difference, having a digital read out of the angles. Measure both the angle and length at the same time with a clear display and bold markings in both Metric and Imperial on the rules. The rules are made from corrosion resitant stainless steel. The battery life is around 200 hours and is protected by auto shut down after 6 minutes. They have a clever auto-start of the digital read out, this will switch on as soon as you open the rule, saving time and fumbling for a button. A serious tool for any carpentry or setting out tasks.

This 6in (150mm) digital vernier calliper features a zero reset button, metric imperial conversion, spare battery, plastic storage case and caliper instructions. For internal or external measurements, where an accurate measurement is essential, this calliper also features a large LED screen. It incorporates all the general features of conventional vernier callipers.

25mm (1in) External micrometer which measures from a minimum of 0.01mm to 25mm. Enamel steel frame with matt chrome thimble and sleeve. Comes with plastic storage case.

Enamel steel frame, heat plates, matt chrome thimble and sleeve, tungsten carbide measuring faces, lock, ratchet, metric and imperial conversion button, auto switch off are just some of the features of this micrometer. 0.001mm - 25mm measuring range. Comes in plastic storage case.

A 60mm diameter Digital Dial Indicator with many fuctions for the measurement of spindles, surfaces, cutters etc. With a 13mm travel and a large, easy to read display this dial gauge has a resolution of 0.001mm and an accuracy of 0.008mm. As well as the number display there is a graphical display for up to 0.25mm of sensor movement. This is available from any position using the zero function. The ability to measure absolute, repetitive volume and reverse readings are by direct function buttons. Able to display in both metric and imperial without changing the reading position. With both 8mm and 9.5mm mounting stem this unit will fit most mounting stands available today. An engineer's dream!