This has to be the simplest way to screw down decking, leaving a clean deck finish as the screw heads are concealed, the Kreg DeckJig™ allows you to drill the hole and screw down the decking in two easy steps.
There is a choice of 3 hole positions, each has a hardened steel bushes to take the drill then screw, the bush is set at an angle to the edge controlling where the pilot hole and screw are positioned as well as controlling the depth. This jig ensures a strong fix through the edge of the board into the frame every time.
The kit is supplied with board spacers, operational DVD and case. Kreg weather resistant Protec-Kote or Stainless steel screws available.

D.I.Y'ers, This is the Pocket Hole Jig for you. 9 Position Settings Wood Chip Relief Holes Clamp Adapter Organized Carrying Case Hardened steel drill guides with lifetime warranty The Perfect Pocket Hole Jig for the Do-It-Yourselfer NOW AVAILABLE! If you’re ready to start your next woodworking or home improvement project, the R3 Kreg Jig® is the tool for you. Whether you’re looking to build that bookcase for your home office, cabinets for the kitchen, plant stand for the decking, or simple storage shelves for your garage, this is the tool that will allow you to build like a professional.

With a 25% smaller hole diameter, the Micro Pocket™ Drill Guide lets you create more compact, low-profile Pocket-Holes in the same joinery applications, but also tackle smaller projects, thinner stock, and tighter repair applications, where standard Pocket-Holes simply can’t go. Designed for use with the Kreg Jig® or Kreg Jig® Master System.

Kit includes:
• Micro Pocket
• Drill Guide
• Micro Pocket
• Drill Bit
• Micro Pocket
• Depth Collar
• Starter Screw Set.

The Ultimate Joinery Tool for the Woodworking Enthusiast! The K3 Kreg Jig is packed with loads of innovative new features. The first of these new features is a three drill guide block that can now be used in two separate tool bodies. Slide the block into the benchtop base and drill pocket holes on your workbench, or remove the drill guide block and quickly place it into the smaller, portable base for use on the job site. The face of the drill guide block now features a metal insert that will produce years of clean-cut pocket holes. In addition, the benchtop base features front side clamping that places the clamp handle on the same side as you drill - No more reaching around the workpiece to clamp! Are you tired of having to clean up wood chips after a day of drilling pocket holes? The benchtop base also accepts a snap-on dust collection shroud that can be easily connected to a shop-vac for chip free drilling! Kreg have also built-in more height adjustment into the drill guide block, allowing you to center a screw in materials from 1/2 inch to 1-1/2 inch thick in 1/8 inch increments. Another new addition to the K3 model is the Material Support Stop. This innovative feature allows you to place pocket holes in exactly the same location on multiple workpieces for true production style pocket hole drilling. The stop is hinged so it can be easily moved out of the way when drilling panels. Quite simply, the Kreg Jig K3 Master System is the most feature packed pocket hole tool on the market, from the legendary leader in pocket hole technology. The Kreg Jig K3 Master System contains: (1) K3 Drill Guide Block, Benchtop Base, Portable Base, Dust Collection Shroud, Material Support Stop, Premium Face Clamp, 3/8 inch Step Drill Bit (KJD), 6 inch - #2 Driver Bit, 3 inch - #2 Driver Bit, Depth Collar, 1/8 inch Allen Wrench, SPS-C1 screws, SML-F125 screws, SML-C125 screws, SML-C150 screws, SML-C2 screws, SML-C250W screws. Carrying Case and Detailed Instruction Manual.

The Perfect Tool for Repairs! The single-drill guide Mini Kreg Jig™ is Kreg's most positionable pocket hole tool. The jig is designed without an alignment fence which allows it to be clamped at virtually any angle or orientation to the edge of the workpiece. Great in situations where the project is already assembled and in need of an extra pocket hole or in repair applications such as tightening a chair or table rail to the leg. • Compact, single-drill guide design allows placement of pocket holes in tightest areas. • Unlimited material thickness and width positioning thanks to fenceless design. • Hardened steel drill guide with lifetime warranty holds up in the most demanding applications. • Glass-reinforced nylon jig body stands up to tough, high-impact abuse. • Plug setting feature in bottom of tool helps to fully seat pocket hole plugs into place saving wear and tear on your hands.

The D.I.Y. Kreg Jig! The perfect choice for anyone new to Pocket Screw Joinery. Its simple design gives the end user confidence to start a project! For a limited period, a Dust Collection Attachment to keep a clean workshop is included. Connect any standard 1¼" vacuum hose to your Kreg Jig for faster drill strokes. Works only with Kreg K4 Jig and K3 Master System. Includes everything needed to get started with Pocket Screw Joinery, Kreg Jig, Stepped Drill Bit, 6 inch Square Driver, Starter Screw Set, Starter Plug Set, SkillBuilder DVD & Quick-Start Guide, contained in a compact and durable carrying case!

When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the Foreman Pocket Hole Machine. The semi-automatic Foreman features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the ¾hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply. 90-120psi recommended - minimum compressor capacity of 5.3 cfm at 90psi.
• Tabletop height of 6¾"
• Fast, semi-automatic operation; automatic "hands-free" clamping, quiet pneumatic drill motor with lever operated drill stroke
• Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged
• Adjustability to handle ½" through 1½" thick material
• Stable work surface with easily adjustable "swing-stop" material positioning guides
• Hinged-top that allows easy access to drill bit and motor

The DK1100 FE (Floor Electric) is housed in a floor standing cabinet and runs on 110v power. This Single-spindle machine features the ability to center a screw in ½" to 1½" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the drill spindle in a lightening quick one second. Powered by an 1100W electric motor for the drill spindle of the machine. 100psi of air pressure is needed to cycle the hold-down clamp and forward motion cylinder. This is a fully pneumatic machine built to run day after day in rugged, high-production environments. Our DK1100 single-spindle machines are fully-automatic production pocket hole machines. Designed to run in the most demanding high-volume production environments, they are built with true industrial quality motors that provide the power, precision and reliability to get the job done.

The DK1100 FP is a floor-standing, entirely pneumatic powered, fully-automatic pocket hole boring machine. 110-120psi is recommended (the machine is 80 to 150psi rated) to power the 1¼hp direct drive pneumatic motor, hold-down clamp and forward motion cylinder. This Single-spindle machine features the ability to center a screw in ½" to 1½" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the drill spindle in a lightening quick one second. This is a fully pneumatic machine built to run day after day in rugged, high-production environments. We offer two other machines in this same line. DK1100 TP, Table Top Pnuematic and DK1100 FE,Floor Standing Electric versions. Our DK1100 single-spindle machines are fully-automatic production pocket hole machines. Designed to run in the most demanding high-volume production environments, they are built with true industrial quality motors that provide the power, precision and reliability to get the job done.

The DK1100 TP is a bench-top entirely pneumatic powered, fully-automatic pocket hole boring machine. It is housed in a compact cabinet and can be either built into a work surface saving space on the shop floor, or is easily transported from your workshop to site. 110-120psi is recommended to power the direct drive air motor, hold-down clamp and forward motion cylinder.This Single-spindle machine features the ability to center a screw in ½" to 1½" thick material, hardened steel drill guides that maximize drill bit life and minimize bit deflection, swing stops that ease material positioning with both rails and panels, and a one-touch foot pedal that fires the drill spindle in a lightening quick one second. This is a fully pneumatic machine built to run day after day in rugged, high-production environments. We offer two other machines in this same line. The DK1100 single-spindle machines are fully-automatic production pocket hole machines. Designed to run in the most demanding high-volume production environments, they are built with true industrial quality motors that provide the power, precision and reliability to get the job done.